Siemens SIMATIC Rack PC 840 Manual page 93

Groups marked + can contain more than one device. When you select a group
marked in this way, hit Enter to view the list of devices in the group. See the figure
below for an illustration:
Figure 5-17
This screen shows all possible boot devices; within a given group the highest
priority device is always listed first. Here again, you can change the sequence as
described above.
If a boot device is not available, the next device in the sequence is automatically
checked to ascertain whether or not it is bootable.
SIMATIC Rack PC 840 Manual
A5E00104826-03
PhoenixBIOS Setup Utility
Main Advanced Security
–Diskette Drive
Floppy Drive
–Removable Devices
Floppy Drive
–Hard Drive
IFUJITSU MPD3043AT-(PM)
Alternate Device
ATAPI CD-ROM Drive
Intel. Boot Agent
Help Select Item
F1
ESC Exit Select Menu
The "Boot Sequence" Menu (Example)
Configuring the SIMATIC Rack PC 840
Power Boot Sequence
Item Specific Help
Keys used to view or
configure devices:
<Enter> expands or
collapses devices with
a + or –
<Ctrl+Enter> expands
all
<+> and <–> moves
the device up or down.
+ / – Change Values F9
Select
Enter Sub-Menu F10
Version Exit
Setup Defaults
Save and Exit
5-23