Siemens SIMATIC Rack PC 840 Manual page 5

Retrofit Notes
Appendix C describes the permissible variants of equipment for Rack PC 840
including drives and processors and the resulting permissible operating conditions.
Glossary
The glossary explains important terms.
Alphabetical Index
The index will enable you to quickly find passages in the text pertaining to
important keywords.
Conventions
The abbreviation Rack PC oder device is also used within this manual for the
product designation SIMATIC Rack PC 840.
Further Support
If you have questions related to the use of the products which are not answered in
this manual, please consult your Siemens representative in your local agency.
http://www.ad.siemens.de/partner
Training Center
Siemens offers a number of training courses to familiarize you with the SIMATIC
S7 automation system. Please contact your regional training center or our central
training center in D 90327 Nuremberg, Germany for details:
Telephone:
http://www.sitrain.com/
SIMATIC Documentation on the Internet
You will find the documentation on the internet at:
http://www.ad.siemens.de/support
Use the Knowledge Manager to find the documentation you need quickly. If you
have any questions or suggestions concerning the documentation you can use the
"Documentation" conference in the internet forum.
SIMATIC Rack PC 840 Manual
A5E00104826-03
+49 (911) 895-3200
Preface
v