Siemens SIMATIC Rack PC 840 Manual page 76

Configuring the SIMATIC Rack PC 840
System Time und System Date Time and Date
System Time and System Date indicate the current values. Once you have
selected the appropriate option, you can use the [+] and [–] keys to modify the time
setting
Hour:Minute:Second
and the date
Month/Day/Year.
You can move between the entries in the date and time options (for example, from
hour to minute) using the tabulator key.
Diskette A Disk Drive
The type of floppy drive installed in the PC is set here. The following entries are
possible:
[Disabled]
[1.44 MB, 3 1/2"]
Primary Master Primary Slave Secondary Master/ Secondary Slave
The system jumps to the following submenu when you select this type of menu
field:
Figure 5-3
5-6
if no disk drive is available.
Default setting for an installed disk drive A
PhoenixBIOS Setup Utility
Main
Primary Master [4326 MB]
Type: [ Auto
LBA Format
Total Sectors: [40031712]
Maximum Capacity: 20496 MB
Multi-Sector Transfers: [16 Sectors]
[Enabled]
LBA Mode Control:
32 Bit I/O: [Enabled]
Transfer Mode: [FPIO 4 / DMA 2]
[Mode 5]
Ultra DMA Mode:
Help Select Item
F1
ESC Exit Select Menu
Primary Master
Item Specific Help
[Auto] (recommended)
Autotypes installed
]
IDE-devices
[USER]
Enter parameters of
IDE-devices installed
at this connection
+ / – Change Values
Enter Select
Sub-Menu
SIMATIC Rack PC 840 Manual
F9 Setup Defaults
F10 Save and Exit
A5E00104826-03