Siemens SIMATIC Rack PC 840 Manual page 73

Screen Display Following Power On
With the default setting of your PC, the display shown below appears following
power-on:
Phoenix BIOS 4.0 A5E000xxxxx–ES0x
Copyright 1985-2000 Phoenix Technologies Ltd.
All Rights Reserved.
SIMATIC Rack PC 840 V10.01.02
CPU = Intel PentiumIII
640K System RAM Passed
127MB Extended RAM Passed
0256K Cache SRAM Passed
System BIOS shadowed
Video BIOS shadowe
Mouse initialized
Fixed Disk 0: xxxx
ATAPI CD-ROM: Txxx
Press <F2> to enter SETUP
If you press the F2 key while the above display is shown, you select the
ROM-based BIOS setup program. In this program, you can set a number of
system functions and hardware configurations of your programming device.
The default settings are effective on delivery. You can change these settings using
the BIOS setup. The modified settings become effective when you have
saved them and terminated the BIOS setup.
The following screen shots may differ from what is shown here, depending on the
device configuration. The following screen form appears when you start the BIOS
setup:
Header
Menu bar
Selectable
submenu
Operation line
Figure 5-1 SETUP Main Menu (Example)
SIMATIC Rack PC 840 Manual
A5E00104826-03
866MHz
d
PhoenixBIOS Setup Utility
Main Advanced Security
System Time: [ 15:35:32 ]
[ 01/08/2001 ]
System Date:
Diskette A: [Disabled]
Primary Master [20496MB]
Primary Slave [None]
Secondary Master [CD-ROM]
Secondary Slave [None]
[Write Back]
Memory Cache:
Boot Options
Keyboard Features
Hardware Options
System Memory:
Extended Memory: 62976 KB
Help Select Item
F1
ESC Exit
Select Menu
Configuring the SIMATIC Rack PC 840
Power Boot Sequence
Item Specific Help
<Tab>,
<Enter> selects field.
Example:
Hour/Minute/Second
Month/Day/Year
Help window
640 KB
+ / – Change Values
Select
Enter Sub-Menu
Version Exit
<Shift-Tab>, or
F9 Setup Defaults
F10 Save and Exit
5-3