Table of Contents
Advertisement
8. ATTACHING AN ARM
The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the
LCD monitor.
When attaching an arm or stand, follow the instructions of their user's manual.
When using another manufacturer's arm or stand, confirm the following in advance and select one
conforming to the VESA standard.
Clearance between the screw holes: 100 mm x 100 mm
Thickness of plate: 2.6 mm
Strong enough to support weight of the monitor unit (except the stand) and attachments such as
cables.
Please connect cables after attaching an arm stand.
Setup Procedure
1. Lay the LCD monitor down. Do not scratch the panel.
2. Remove the tilt stand by loosening the screws (4 pcs of M4 x 15 BZn/Fe).
3. Attach an arm stand to the LCD monitor securely.
Advertisement
Table of Contents
