Samson TROVIS 3730-3 Mounting And Operating Instructions page 58

Mounting and start-up
Intermediate plate for AA4 interface
Î Refer to Fig. 18.
An intermediate plate (1) must be mounted
between the adapter block and adapter
bracket for SRP and DAP rotary actuators in
sizes 900 and 1200 with AA4 interface.
This plate is included in the accessories for
the shaft adapter AA4 (see Table 6 on
page 24).
Version for single-acting actuator:
11 Intermediate plate
Fig. 18: Intermediate plate for actuators in sizes 900 and 1200 for AA4 interface
58
Mounting a solenoid valve
Î Refer to Fig. 19.
A solenoid valve can also be mounted in
place of the blank plate (18). The orientation
of the turnboard (17) determines the mount-
ing position of the solenoid valve. Alterna-
tively, a restrictor plate can be mounted. Fur-
ther information can be found in the docu-
ment u AB 11 (Accessories for Solenoid
Valves).
Version for double-acting actuator:
11 11
EB 8484-3 EN