Samson TROVIS 3730-3 Mounting And Operating Instructions page 122

Appendix
Menu
Control parameters
Tip
The control parameters are explained in the SAMSON brochure u Controllers and Controlled Systems
as part of the Technical Information series (www.samson.de > Service & Support > Downloads >
Documentation).
Dead band
Activate integral-action
component
User-defined control
parameters
Loop gain (fill with air)
Kp (supply air)
Ki (supply air)
Kd (supply air)
Loop gain (venting)
Kp (venting)
Ki (supply air)
Kd (venting)
End position (optimized)
Options
Module status
Identification
Option A
Module status
Identification
Option B
Module status
Identification
Limit contact 1
Limit contact 2
Limit contact 3
122
Adjustment range/values [default setting]/description
8.4
[0.1] to 100.0 %
8.4.1
8.4.2 [Active]/Not active
8.4.3 [Not active]/Active
8.4.4 1 to 650 [10]
8.4.5 0.1 to 200 [27]
0.1 to 100 [7.5]
8.4.6
8.4.6 0.5 to 200 [100]
8.4.8 1 to 650 [50]
8.4.9 0.1 to 200 [18]
0.1 to 100 [7.5]
8.4.10
8.4.11 0.5 to 200 [100]
8.4.12 [Active]/Not active
8.5
8.5.1 Read only
8.5.2 Read only
8.5.3 Parameters for option A (see section 12.3.2)
8.5.4 Read only
8.5.5 Read only
8.5.6 Parameters for option B (see section 12.3.2)
8.5.7 Read only
8.5.8 Read only
8.5.9...
8.5.10...
8.5.11...
EB 8484-3 EN