Common Remote-Control Shortcuts - Avaya IX Room Systems XT Series Release Notes

© 2019 Avaya Inc. All rights reserved

Common Remote-Control Shortcuts

•
To check the call status and diagnostics during a call, press the Stats button in the Call Control
Panel. To view statistics for each participant in a meeting, press left/right arrows to select the
previous and next participant.
•
To access the layouts menu during a call, press and hold the 'layouts' key.
•
Access the Call Control Panel by pressing 'ok/menu' on the Remote Control, or double click with
the mouse. The Panel automatically disappears after a few seconds. To manually hide it, press
the 'back/undo' key.
•
Press and hold a single digit (0-9) on the Remote-Control Unit to recall an assigned position of
the local or far PTZ camera.
•
When entering the meeting ID for a videoconference hosted by an Avaya Equinox/Scopia MCU,
use the * digit to delete an incorrect digit (as indicated on the MCU prompt).
Use * Key to Cancel a Meeting ID
•
To restore the Codec Unit to automatic monitor configuration, press the 'layouts' key, and then
press 0 on the Remote-Control Unit. Use this shortcut only when no call is active.
•
To change the refresh frequency used for the monitors, press the 'layouts' key on the Remote-
Control Unit, then press 5 to set it to 50 Hz or 6 to set it to 60 Hz. Use this shortcut only when no
call is active
•
Press and hold the 'call' key to toggle Do Not Disturb
Release Notes for Avaya XT Series Common Remote-Control Shortcuts | 33