Specifi Cations - 3M -Matic AccuGlide 3 200a Instructions And Parts List

Specifi cations
1.
Tape:
For use with Scotch
2.
Tape Width:
36mm or 1-1/2 inches minimum to 48mm [2 inches] maximum.
3.
Tape Roll Diameter:
Up to 405mm [16 inches] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
4.
Tape Application Leg Length - Standard:
70mm ± 6mm [2-3/4 inches ±1/4 inch]
Tape Application Leg Length - Optional:
50mm ± 6mm [2 inches ± 1/4 inch] (See "Adjustments – Tape Leg Length.")
5.
Box Size Capacities:
For use with center seam regular slotted containers.
Length –
Height –
Width –
When upper and lower taping heads are used on "3M-Matic" case sealers, refer to the respective instruction
manual specifi cations for box weight and size capacities.
6.
Operating Rate:
Conveyor speeds up to 0.5 m/s [100 feet per minute].
7.
Operating Conditions:
Use in dry, relatively clean environments at 5° to 40°C [40° to 105°F] with clean dry boxes.
Important – Taping heads should not be washed down or subjected to conditions causing moisture
condensation on components.
8.
Taping Head Dimensions:
Length
Height
Width
Weight
AccuGlide 3 Taping Head - 2"
pressure-sensitive fi lm box sealing tapes.
®
443mm [17.44 inches]
406mm [16 inches]
107mm [4.2 inches]
– 442mm [17 3/8 inches]
– 648mm [25 1/2 inches] (with tape drum)
– 105mm [4-1/8 inches] (without mounting spacers)
– Packaged: 8.6kg [19 lbs.] Unpackaged: 7.7kg [17 lbs.]
fi lm tapes.)
®
w/ Guard
w/ Guard
(Specifi cations continued on next page.)
6
2009 February