4-SPECIFICATIONS
1. Power Requirements
Electrical: 115 Volt,60Hz, 1.9 A (220 watts)
The machine is equipped with a 2.4m [8 foot] standard neoprene covered power cord and a grounded plug.
Contact your 3M Representative for power requirements not listed above.
2. Operating Rate
Box drive belt speed is approximately 0.5 m/s [100 feet per minute].
45
40
35
30
25
20
15
10
5
0
0
3. Operating Conditions
Use in dry, relatively clean environments at 5
Note: Machine should not be washed or subjected to conditions causing moisture condensation on
components.
4. Tape
®
Scotch
pressure-sensitive fi lm box sealing tapes.
5. Tape Width
36mm [1 1/2 inch] minimum to 48mm [2 inch] maximum
200a-NA
5
10
15
o
C to 50
WARNING
•
To reduce the risk associated with fi re
and explosion hazards:
−
Do not operate this equipment in poten-
tially fl ammable or explosive environments.
20
25
30
o
o
o
C [40
F to 120
F] with clean, dry boxes.
12
35
40
2009 February