Replacement Parts Illustrations And Parts List - 3M -Matic AccuGlide 3 200a Instructions And Parts List

Replacement Parts Illustrations and Parts Lists
AccuGlide™ 3 Upper Taping Head - 2 inch, Type 10800
AccuGlide™ 3 Lower Taping Head - 2 inch, Type 10800
1. Refer to the Taping Head Assemblies Figure to fi nd all the parts illustrations identifi ed by fi gure numbers.
2. Refer to the fi gure or fi gures to determine the individual parts required and the parts reference number.
3 . The replacement parts list, that follows each illustration, includes the part number and part description
for the parts in that illustration.
Note – The complete description has been included for standard fasteners and some commercially
available components. This has been done to allow obtaining these standard parts locally, should
the customer elect to do so.
4. Refer to the fi rst page of this instruction manual "Replacement Parts and Service Information" for
replacement parts ordering information.
IMPORTANT – Not all the parts listed are normally stocked items. Some parts or assemblies shown
are available only on a special order basis. Contact 3M/Tape Dispenser Parts to
confi rm item availability.
AccuGlide 3 Taping Head - 2"
20
2009 February