Remote Power Operation (Wake On Lan); Figure 47 Wake On Lan - Fujitsu ETERNUS DX S5 Series Design Manual

2. Basic Functions
Power Control

Remote Power Operation (Wake On LAN)

Wake On LAN is a function that turns on the ETERNUS DX via a network.
When "magic packet" data is sent from an administration terminal, the ETERNUS DX detects the packet and the
power is turned on.
To perform Wake On LAN, utility software for Wake On LAN such as Systemwalker Runbook Automation is
required and settings for Wake On LAN must be performed.
The MAC address for the ETERNUS DX can be checked on ETERNUS CLI.
ETERNUS Web GUI or ETERNUS CLI can be used to turn off the power of an ETERNUS DX remotely.
Figure 47 Wake On LAN
LAN
ETERNUS DX
Packet transmission
Administration terminal
Wake On LAN utility
106 Design Guide