Fujitsu ETERNUS DX S5 Series Design Manual page 212

5. Connection Configuration
SAN Connection
• Internet Protocol
IPv4 and IPv6 are supported.
Data Center Bridging (DCB)
•
iSCSI 10Gbit/s interfaces support the Data Center Bridging (DCB) function.
DCB is an enhanced function of traditional Ethernet and a standard for Fabric connections in data centers. The
DCB function allows connections to Converged Enhanced Ethernet (CEE) environments.
■
SAS
This host interface is supported only for the ETERNUS DX60 S5/DX100 S5/DX200 S5.
Simple, cost effective, and high performance network storage environment can be configured. Direct
connections and switch connections to servers are available. SAS 12Gbit/s is supported.
One of the following transfer rates can be specified:
• 12Gbit/s
• 6Gbit/s
3Gbit/s
•
212 Design Guide