Table 86 Maximum Number Of Host Interfaces Per Controller; Table 87 Host Interface Specifications - Fujitsu ETERNUS DX S5 Series Design Manual

6. Hardware Configurations
Controller Enclosure
■
Host Interfaces
A host interface (CA) is an adapter that has interface ports to connect a controller to a server.
The following table shows the maximum number of host interfaces that can be installed per controller.
Table 86 Maximum Number of Host Interfaces per Controller
Model
ETERNUS DX60 S5
ETERNUS DX100 S5
ETERNUS DX200 S5
ETERNUS DX500 S5
ETERNUS DX600 S5
ETERNUS DX900 S5
Host interfaces can be added during system operation. When an error occurs, a replacement can be made while
the system is running.
FC, iSCSI, and SAS are available as the SAN host interface. Ethernet is available as the NAS host interface.
Different types of interfaces can exist together in the same controller.
The host interface specifications are shown below.
Table 87 Host Interface Specifications
Interface
FC
FC
FC
iSCSI (*3)
iSCSI
iSCSI (*4)
iSCSI
SAS
Ethernet (*3)
Ethernet
Ethernet
*1: FC 32Gbit/s host interfaces can be installed in the ETERNUS DX100 S5/DX200 S5 and the ETERNUS DX500 S5/DX600 S5/DX900 S5.
*2: FC 8Gbit/s host interfaces can be installed in the ETERNUS DX60 S5 only.
*3: The SFP+ module is required.
*4: iSCSI (10GBASE-T) can be installed in the ETERNUS DX60 S5 and the ETERNUS DX100 S5/DX200 S5 only.
Maximum number of host interfaces
1
2
2
2
4
4
Transfer rate (max.)
32Gbit/s
16Gbit/s
8Gbit/s
10Gbit/s
10Gbit/s
10Gbit/s
1Gbit/s
12Gbit/s
10Gbit/s
10Gbit/s
1Gbit/s
259
Connector type
LC
LC
LC
LC
SFP+ (direct attach twinax
copper)
RJ-45
RJ-45
miniSAS HD (SFF-8644)
LC
SFP+ (direct attach twinax
copper)
RJ-45
Number of ports for each CA
2 / 4 (*1)
2 / 4
2 (*2)
2
2
2
2
2
2
2
4
Design Guide