Install Antennas - Chamberlain MyQ Business CAPXL Installation Manual

INTRODUCTION
3

Install Antennas

The Security+ 2.0
opposite sides of the CAPXL. Optional antenna cable kits are available for remote antenna mounting (refer to accessories).
INTRODUCTION
Security+ 2.0
Used with LiftMaster Passport Security+ 2.0
operators.
1. Remove 3/8" knockout
INTRODUCTION
on the side or back of
the CAPXL.
2. Secure the radio
antenna to the desired
knockout on the
CAPXL.
3. Connect the radio
antenna cable to the
Power/Internet Board
as shown.
Wi-Fi Antenna (if applicable)
®
Used for Wi-Fi
1. Remove 1/4" knockout on the
side or back of the module.
2. Secure the Wi-Fi
to the desired knockout on
the CAPXL with the provided
gasket, washer, and nut.
3. Connect the Wi-Fi
cable to the control board as
shown.
PRE-INSTALL
radio antenna and Wi-Fi
® ®
PRE-INSTALL
Radio Antenna (if applicable)
®
PRE-INSTALL
Power/Internet Board
Internet.
®
antenna
®
antenna
®
INSTALL
antennas must be a minimum of 8 inches (20 cm) apart. Install the antennas on
INSTALL
and wireless communication with LiftMaster UL325 2016 compliant gate
®
Security+ 2.0 Radio Antenna
®
INSTALL
ON
ON
ON
ON
13
NETWORK ACCESS CONTROL
NETWORK ACCESS CONTROL
NETWORK ACCESS CONTROL
Wi-Fi Antenna
®
Control Board