Operator Control Panel - Pentair INTELLIFLO VSF Series Quick Start Manual

3.3 FEATURES (CONTINUED)
• Additional Features
• Clock and Timer
• Maximum and Minimum Speed / Flow Limits
• Quick Clean Mode
• Timeout Mode
• Rotatable Keypad
INTELLIFLO VSF DRIVE ASSEMBLY AND CONTROL PANEL
The IntelliFlo drive assembly consists of an operator control panel and the system electronics that drive the
®
motor. The drive microprocessor controls the motor by changing the frequency of the current it receives, together
with changing the voltage to control the rotational speed.

Operator Control Panel,

Buttons and LED
Strain Relief Port
for Incoming AC Power
Motor Stand
INTELLIFLO VSF MOTOR FEATURES
• Permanent Magnet Synchronous Motor (PMSM)
• High efficiency (3450 RPM 92% and 1000 RPM 90%)
• Superior speed control
• Operates at lower temperatures due to high efficiency
• Same technology as deployed in hybrid electric vehicles
• Designed to withstand outdoor environment
• Totally enclosed fan cooled
• 10-Pole
• Low noise
OPERATOR CONTROL PANEL
USING THE OPERATOR CONTROL PANEL
Use the operator control panel to start and stop the IntelliFlo
change programs, and access pump features and settings.
P-QSG-VSF - Rev.November 2017
Communication port for connection
to IntelliPool control system or
IntelliComm communication center via
two-wire RS-485 cable.
IntelliFlo VSF Drive Assembly
®
VSF Variable Speed and Flow Pump, set, and
®
INTELLIFLO VSF - QUICK START GUIDE
7