Using The Operator Control Panel - Pentair Sta-rite INTELLIPRO Installation And User Manual

Using the Operator Control Panel

Use the operator control panel to start and stop the IntelliPro
Variable Speed Pump, program, set, and change speeds
(RPM), and access pump features and settings.
Controls and LEDs on Key Pad
Speed 1: Press to select Speed 1 (750 RPM). LED on
1
indicates Speed 1 is active.
Speed 2: Press to select Speed 2 (1500 RPM). LED on
2
indicates Speed 2 is active.
Speed 3: Press to select Speed 3 (2350 RPM). LED
3
on indicates Speed 3 is active.
Speed 4: Press to select Speed 4 (3110 RPM). LED
4
on indicates Speed 4 is active.
Select: Press to select the currently displayed option
5
on the screen.
Escape: Goes one step back in menu; exits without
6
saving current setting.
Menu: Accesses the menu items when and if the pump
7
is stopped.
Enter: Saves current menu item setting. Press this
8
button to acknowledge alarms and warning alerts.
Arrow buttons:
9
• Up arrow: Move one level up in the menu or
increase a digit when editing a setting.
• Down arrow: Move one level down in the menu or
decrease a digit when editing a setting.
• Left arrow: Move cursor left one digit when editing
a setting.
• Right arrow: Move cursor right one digit when
editing a setting.
Quick Clean: Pump ramps up to higher RPM for
10
vacuuming, cleaning, adding chemicals, and after a
storm for extra skimmer power. LED light is on when
active.
Time Out: Pump is not running on preset schedule. This
11
can be used to allow newly glued pipe joints time to dry
before circulation of water starts. LED is on when active.
Start/Stop button: To start or stop the pump. When
12
LED is on, the pump is running or in a mode to start
automatically.
Reset button: Reset alarm or alert.
13
LEDs:
14
On: Green light when pump is powered on.
Warning: On if warning condition is present.
Alarm: Red LED on if alarm condition occurs.
See "Alerts and Warnings" on page 23.
Control Panel LCD Screen:
15
• Line 1: Key icon indicates password protect mode
is active. If password protect is not enabled, no key
icon is displayed. Also shows current time of day.
• Line 2: Displays current pump speed (RPM).
• Line 3: Countdown time and watts
• Line 4: Current pump status and current feature.
®
750 RPM
T 0.00
Running Speed 1
Speed Speed
1
1
2
5
Time
Quick
Out
Clean
Control Panel #1-8
Key Lockout Icon
Line 1
750 RPM
Line 2
15
T 0.00
Line 3
Running Speed 1
Line 4
Speed Speed
1
14
Time
Quick
10
Clean Out
11
Control Panel #9-15
INTELLIPRO Variable Speed Pump Installation and User's Guide
®
12:15
150 WATTS
Speed Speed
2 3 4
12:15
Current Time
Current Speed
Countdown Time
150 WATTS
Current Power
Usage
Current Feature
Running
Speed Speed
2 3 4
5
4
3
6
7
8
9
13
12