Table of Contents
Advertisement
6
Using the Operator Control Panel
Use the operator control panel to start and stop the Sparus
Pump with Constant Flow Technology, program, set, and
change speeds (RPM), and access pump features and
settings.
Controls and LEDs on Key Pad
Speed 1: Press to select Speed 1 (40 GPM). LED on
1
indicates Speed 1 is active.
Speed 2: Press to select Speed 2 (50 GPM). LED on
2
indicates Speed 2 is active.
Speed 3: Press to select Speed 3 (60 GPM). LED on
3
indicates Speed 3 is active.
Speed 4: Press to select Speed 4 (70 GPM). LED on
4
indicates Speed 4 is active.
Select: Press to select the currently displayed option
5
on the screen.
Escape: Goes one step back in menu; exits without
6
saving current setting.
Menu: Accesses the menu items when and if the pump
7
is stopped.
Enter: Saves current menu item setting. Press this button
8
to acknowledge alarms and warning alerts.
Arrow buttons:
9
• Up arrow: Move one level up in the menu or increase
a digit when editing a setting.
• Down arrow: Move one level down in the menu or
decrease a digit when editing a setting.
• Left arrow: Move cursor left one digit when editing
a setting.
• Right arrow: Move cursor right one digit when
editing a setting.
Quick Clean: Pump ramps up to higher RPM. LED light
10
is on when active.
Time Out: Pump is not running on preset schedule. This
11
can be used to allow newly glued pipe joints time to dry
before circulation of water starts. LED is on when active.
Start/Stop button: To start or stop the pump. When
12
LED is on, the pump is running or in a mode to start
automatically.
13
Reset button: Reset alarm or alert.
LEDs:
14
On: Green light when pump is powered on.
Warning: On if warning condition is present.
Alarm: Red LED on if alarm condition occurs.
See "Alerts and Warnings" on page 20.
Control Panel LCD Screen:
15
• Line 1: Key icon indicates password protect mode
is active. If password protect is not enabled, no key
icon is displayed. Also shows current time of day.
• Line 2: Displays current pump speed (RPM) or flow
(GPM)
• Line 3: Countdown time and watts
• Line 4: Current pump status and current feature
SPARUS
Pump with Constant Flow Technology Installation and User's Guide
™
™
1100 RPM
T 0.00
Running Speed 1
Speed
1
1
2
5
Quick
Clean
Control Panel #1-8
Key Lockout Icon
Line 1
1100 RPM
Line 2
15
T 0.00
Line 3
Running Speed 1
Line 4
Speed
1
14
Quick
10
Clean
11
Control Panel #9-15
12:15
150 WATTS
Speed
Speed
Speed
2
3
4
Time
Out
12:15
Current Time
Current Speed
Countdown Time
150 WATTS
Current Power Usage
Current Feature
Running
Speed
Speed
Speed
2
3
4
Time
Out
4
3
6
7
8
9
13
12
Advertisement
Table of Contents
