Pump Overview; Drive Assembly And Control Panel; External Control; Motor Features - Pentair INTELLIFLOXF Installation And User Manual

The IntelliFloXF Variable Speed Pump can be
®
programmed to run at specific speeds and time
intervals for maximum operating efficiency and energy
conservation for a variety of inground pools.
• The pump can operate from 450 RPM to 3450 RPM
with four preset speeds of 750, 1500, 2350 and 3110
RPM
• The pump can be adjusted from the control panel to
run at any speed between 450 RPM to 3450 RPM for
different applications
• Up to 8 programmable speeds
• Pump control panel alarm LED and error messages
warn the user against under and over voltage, high
temperature, over current and freezing
• Communicates with EasyTouch, IntelliTouch or
SunTouch control systems or an IntelliComm
communication center via a two-wire RS-485 cable
connection
• Programmable priming mode with automatic detection
of prime for easy start-up
• Compatible with most cleaning systems, filters, and jet
action spas
• WEF 5.6 THP 3.95

Drive Assembly and Control Panel

The IntelliFlo pump drive is designed to produce
maximum motor operational efficiency. The drive controls
the motor's rotational speed by controlling the frequency
of the supplied current. It also protects the motor and
pump from operating outside of their intended operating
parameters.
The control panel can be mounted on the pump in four
different directions in order to provide the user the best
access. The control panel can also be mounted in a more
convenient location with the help of the keypad relocation
kit (P/N 356904Z [Almond] or 356905Z [Black]).
Operator Control Panel Cover
Buttons and LEDs (Beneath)
Strain Relief
Port for Incoming
AC Power

External Control

IntelliTouch
and IntelliComm
control the IntelliFlo pump. The pump's communications
address and other functions are accessible from the
pump's control panel.
• RS-485 communication cable included
• IntelliTouch systems control 8 IntelliFlo pumps using 8
speeds per pump.
• EasyTouch systems control 2 IntelliFlo pumps using 8
speeds per pump.
• SunTouch systems control one IntelliFlo pump using
8 speeds.
• IntelliComm systems control one IntelliFlo pump using
the 4 External Control programs.

Motor Features

• High Efficiency Permanent Magnet Synchronous
Motor (PMSM)
• Superior speed control
• Operates at lower temperatures due to high
efficiency
• Designed to withstand outdoor environment
• Totally Enclosed Fan Cooled (TEFC) Motor
• 56 Square Flange
• Low noise

Drive Features

• Active Power Factor Correction
• Rotatable Keypad
• Easy Overhead Wiring
• High Drive Operational Efficiency
Communication port to connect to
automation system via two-wire
RS-485 cable (not shown).
XF
®
INTELLIFLO and INTELLIPRO

PUMP OVERVIEW

, EasyTouch , SunTouch
® ®
Communication Centers can remotely
®
Union Kit
(Suction and Discharge Fittings)
XF
®
Variable Speed Pump Installation and User' s Guide
1
Control Systems
®