Operator Control Panel; Using The Operator Control Panel P; Controls And Leds On Keypad P - Pentair INTELLIFLO VSD2 Operating Manual

OPERATOR CONTROL PANEL (1/2)

USING THE OPERATOR CONTROL PANEL
Use the operator control panel to start and stop the IntelliFlo
set, and change speeds (RPM), and access pump features and settings.
CONTROLS AND LEDS ON KEYPAD
Button 1: Press to select Speed 1 (750 RPM). LED on indicates Speed 1 is active.
1
Button 2: Press to select Speed 2 (1500 RPM). LED on indicates Speed 2 is active.
2
Button 3: Press to select Speed 3 (2350 RPM). LED on indicates Speed 3 is active.
3
Button 4: Press to select Speed 4 (3110 RPM). LED on indicates Speed 4 is active.
4
Back: Goes one step back in menu; exits without saving current setting.
5
Save: Saves current menu item setting. When a parameter has been adjusted the "Save?"
6
icon will be displayed.
Menu: Accesses the menu items when and if the pump is stopped.
7
Select: Press to select the currently displayed option on the screen.
8
Note: Always close the keypad cover after using the keypad.
Note: Using screwdrivers or pens to program the pump will damage the keypad overlay. Use
your fingers only when programming the pump.
10
Key Lockout Icon
1
2
5
Line 1
Line 2
15
Line 3
Line 4
12:15p
750 RPM
T 0.00 150 WATTS
Running Speed 1
1 2 3 4
Back Save
Menu
Select
Quick Time
Out
Clean
Control Panel # 1-8
12:15p
750 RPM
T 0.00 150 WATTS
Running Speed 1 Save?
1 2 3 4
VSD2 Variable Speed Pump,
®
4
3
6
7
8