4
Drive Assembly and Control Panel
The IntelliFlo
®
VF Variable Flow Pump drive assembly consists of an operator control panel and the system
electronics that drive the 230 VAC single phase (260 VAC~170 VAC) motor. The drive microprocessor controls the
motor by changing the frequency of the current it receives together with changing the voltage to control the rotational
speed.
Operator Control Panel,
buttons and LED
(see page 5)
AC power connection
compartment
(see page 31)
Motor stand
Operator Control Panel Features
•
Backwash and Rinse — Informs the user when and how to backwash filter media
•
Vacuum — Can be preset using duration and flow parameters to save energy
•
Filter — Allows pump to run at peak efficiency, saving users up to 90% in energy cost, based on a
pool size up to 15,000 gallons, one turn per day with a 24 hour cycle.
•
Feature — Ten feature modes can be programmed to control filtration duration, start and stop time,
and frequency for cleaners, water features, spas, and waterfalls
•
Manual — Allows the user to override all programming and run the pump using RPM or flow (GPM)
control parameters. All personnel safety devices and alarms do not operate in speed mode.
INTELLIFLO
®
VF Variable Flow Pump Installation and User's Guide
IntelliFlo Drive Assembly