Toro Reelmaster 6700-D Operator's Manual page 22

Glow Plug Indicator Light
When the indicator light (Fig. 23) is lit, indicates glow
plugs are on.
Charge Indicator
The charge indicator (Fig. 23) illuminates when system
charging circuit malfunctions.
Enable/Disable Switches
The enable/disable switches (Fig. 23) are used in
conjunction with the lower mow/raise control lever
(Joystick) to operate reels. Reels can be raised but not
lowered when in mid position.
2
1
4
7
8
Figure 23
1. Lower mow/raise control
lever
2. Fuel gauge
3. Engine coolant
temperature gauge
4. Engine oil pressure
warning light
5. Engine coolant
temperature warning light
Hour Meter
The hour meter (Fig. 24) shows total hours that machine
has been operated.
5
3
6
10
9
11
6. Glow plug indicator light
7. Charge indicator
8. Throttle control
9. Enable/disable switch
(Master)
10. Enable/disable switch
(#7) right rear
11. Enable/disable switch
(#6) left rear
22
1
Figure 24
1. Hour meter
Backlap Knobs
The backlap knobs (Fig. 25) are used in conjunction with
lower mow / raise control lever for backlapping operation.
Refer to Cutting Unit Maintenance, Backlapping.
Reel Speed Controls
Controls RPM of front and rear cutting units (Fig. 25). #1
position is for backlapping. Remaining settings are for
mowing operations. See section in manual for operating
instructions and decal under seat for proper settings.
2
1
Figure 25
1. Reel control knobs
1
2
2. Backlap knobs