Toro Reelmaster 6700-D Operator's Manual page 16

Note: Moving the carrier frame down will decrease the
amount of clearance between the cutting units and the
ground in turnaround and transport positions and may
require adjusting the lift chain length on the cutting unit.
1
Figure 11
1. Carrier frame mounting bolts
Rear Ballast
Model 03808 complies with the ANSI B71.4–1999
Standard when the following is installed on machine.
100 lbs. of calcium chloride ballast is added to rear
wheels.
Wheel weight kit (Part No. 104–1478)
Important
If a puncture occurs in a tire with calcium
chloride, remove unit from turf area as quickly as possible.
To prevent possible damage to turf, immediately soak
affected area with water.
16