Using The Pc Settings Feature; Setting The Pc Audio Mode - Toshiba REGZA 42LX196 Operating Manual

Using the PC settings feature

You can view the image from a PC on the TV screen. The PC
must be connected to the TV's PC IN terminals
(- Installation Guide).
The PC Settings feature allows you to make any necessary
adjustments to the image.
If the edges of the image are not visible, you can adjust the
Horizontal Position/Width and Vertical Position/
Height.
If the picture is affected by interference, you can adjust the
Clock Phase and Sampling Clock.
To adjust the PC settings:
Repeatedly press + to select PC input mode
1
(- "Selecting the video input source to view" page 30).
Press Y and open the Setup menu.
2
Highlight PC Settings and press T.
3
Note: If a PC is not connected, this feature will be grayed
out in the Setup menu.
Setup
Installation
Sleep Timer
On/Off Timer
PC Settings
PC Audio
HDMI 1 Audio
Slide Show Interval
Navigate
ENTER Select
4
Press B or b to highlight the item you want to adjust.
5
Press C or c to make the appropriate adjustments.
PC Settings
Horizontal Position
Horizontal Width
Vertical Position
Vertical Height
Clock Phase
Sampling Clock
Reset
Note: The screen is disrupted momentarily when
adjusting the PC settings. This is not a sign of malfunction.
Chapter 5: Using the TV's features
No
Auto
2 Sec
Back Exit
CH RTN EXIT
0
0
0
0
0
0
Done
Horizontal Position:
•
Moves the picture left/right.
The adjustment range is within ±5 from center.*
Vertical Position:
•
Moves the picture up/down.
The adjustment range is within ±5 from center.*
Horizontal Width:
•
Adjusts the width of the picture.
The adjustment range is within ±5 from center.*
Vertical Height:
•
Adjusts the height of the picture.
The adjustment range is within ±5 from center.*
Clock Phase:
•
Helps to reduce noise and sharpen the picture.
The adjustment range is within ±2 from center.*
Sampling Clock:
•
Helps to reduce noise and minimize periodic vertical stripes
on the screen.
The adjustment range is within ±15 from center.*
* The range of adjustment may vary slightly.

Setting the PC Audio mode

This function allows you to output the sound from your PC (if
connected) or mute the sound from your PC and output the
sound from your HDMI (DVI) connection. (- Installation
Guide)
To set the PC Audio:
Press Y and open the Setup menu.
1
2
Highlight PC Audio.
3
Press c and then press b to select No or Yes.
Yes: Outputs the sound from your PC.
No: Mutes the sound from your PC, and outputs the
sound from the HDMI connection.
Setup
Installation
Sleep Timer
On/Off Timer
PC Settings
PC Audio
HDMI 1 Audio
Slide Show Interval
Navigate ENTER Select
Note: Because the PC IN and HDMI (DVI) IN inputs share
the same set of analog audio inputs, the PC Audio menu
setting influences the HDMI 1 Audio menu setting. If PC
Audio is set to "No," the HDMI 1 Audio setting changes
to "Auto." If PC Audio is set to "Yes," the HDMI Audio
setting is set to "Digital" and is grayed out in the menu.
(Also see item 2 on page 8 and "Setting the HDMI
mode" on page 27.)
No
Yes
No
Auto
2 Sec
CH RTN Back EXIT Exit
™ audio
51