Toshiba REGZA 42LX196 Operating Manual page 32

To set up the Channel Browser
Press Y and open the Preferences menu.
1
Highlight Channel Browser Setup and press T.
2
3
Press B to highlight Navigation, and then press C or c
to select either Browse Mode or Select Mode.
Channel Browser Setup
Navigation
History List
ANT1 List
ANT2 List
Cable Box List
Satellite Box List
Inputs List
Favorites List
Reset
4
Press b to highlight History List, and then press C or c
to select the setting you prefer: either Power Off Clear
(On), On, or Off.
Note: When History List is set to On, the channels and
inputs stored in the list will be saved every power on/off
cycle. When History List is set to Power Off Clear (On),
the channels and inputs stored in the list will be cleared
with every power on/off cycle of the TV.
5
Press b to highlight ANT1 List, and then press C or c to
select On or Off.
6
Press b to highlight ANT2 List, and then press C or c to
select On or Off.
7
Press b to highlight Cable Box List, and then press C or
c to select On or Off.
8
Press b to highlight Satellite Box List, and then press
C or c to select On or Off.
9
Press b to highlight Inputs List, and then press C or c
to select On or Off.
10
Press b to highlight Favorites List, then press C or c to
select On or Off.
To save your entries, highlight Done and press T.
11
To return to factory defaults, highlight Reset and
press T.
Note: Cable Box List and Satellite Box List will be
grayed out and set to Off by default. They will remain this
way until a Cable Box and/or Satellite Box is configured
from the TV Guide setup.
To open the Channel Browser
Press 3 C, # c, or n on the remote control.
•
Press 3 C to surf backward through the currently selected
•
list.
Press # c to surf forward through the currently selected list.
•
™
Note: The Channel Browser
POP mode.
32
Chapter 5: Using the TV's features
™
:
Select Mode
Power Off Clear (On)
On
On
Off
On
On
On
Done
™
:
is not available while the TV is in
Elements of the Channel Browser
1 2 3
1 10 HDMI 1
ClrStrmHD1
__
History
Channel Browser ANT 1
4 5
1 Input type
2 Highlighted item (channel or input)
3 Channels with thumbnails stored in the History List
4 Current list (History, ANT 1, ANT 2, Cable Box,
Satellite Box, Inputs, or Favorites)
5 Current input
6 Current antenna type (cable or TV)
7 Active channel number
8
Channel call letters (if available)
9
Resolution
To toggle among the available lists:
After opening the Channel Browser
among History, ANT 1, ANT 2, Cable Box, Satellite Box,
Inputs and Favorites.
Note:
• The Channel Browser ™ opens the History List by default.
Once another list has been selected, the Channel Browser
will open the last selected list.
• If all lists are turned off, pressing
display the Channel Browser
off, n will have no effect.
• Pressing n will bring up the Channel Browser
list regardless of the last selected list in the
™
Channel Browser .
To tune to a channel or input in Browse mode:
1
While watching TV, press 3 C or # c to open the
™
Channel Browser and surf back to a previous item or
forward to the next item in the list.
In Browse mode, when you stop on an item in the
™
Channel Browser , it will be highlighted and the TV will
automatically tune to the channel or input.
Press O to close the Channel Browser
2
Note: The Channel Browser
you do not make a selection within 30 seconds.
™
78 1 4-1 1 8
CABLE 4 AAA 480i
6 7 8 9
, press B or b to toggle
™
, or n will not
3 # c
C,
™ . If Favorites List is turned
™ Favorite
™ .
™
will close automatically if
™