Selecting Stereo/Sap Broadcasts; Adjusting The Audio Quality - Toshiba REGZA 42LX196 Operating Manual

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to
output high-fidelity stereo sound. MTS also can transmit a
second audio program (SAP) containing a second language,
music, or other audio information (when provided by
individual stations).
When the TV receives a stereo or SAP broadcast, the word
"STEREO" or "SAP" appears when E is pressed. The MTS
feature is not available when the TV is in VIDEO mode.
To listen to stereo sound:
Press Y and open the Audio menu.
1
Highlight Audio Setup and press T.
2
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
3
In the MTS field, select Stereo.
Audio Setup
MTS
Language
Speakers
Optical Output Format
Reset
To save the new settings, highlight Done and press T.
4
To reset the settings to the factory defaults, highlight
Reset and press T.
Note:
• You can typically leave the TV in Stereo mode,
because it will automatically output the type of sound
being broadcast (stereo or monaural).
• If the stereo sound is noisy, select Mono to reduce the
noise.
To listen to a second audio program on an analog
station (if available):
Select SAP in step 3 above.
Note:
• A second audio program (SAP) can be heard only on those
TV stations that offer it. For example, a station might
broadcast another language as a second audio program. If
you have SAP on, you will see the current program on the
screen but hear the other language instead of the program's
normal audio.
• If you have SAP on and the station you are watching is not
broadcasting a second audio program, the station's normal
audio will be output. However, occasionally there is no
sound at all in SAP mode. If this happens, set the MTS
feature to Stereo mode.
Chapter 5: Using the TV's features
Stereo
English
On
Dolby Digital
Done
To listen to an alternate language on an ATSC digital
station (if available):
Highlight the Language field in step 3 at left, and then press
C or c to select the language you prefer.

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble,
and balance.
To adjust the audio quality:
Press Y and open the Audio menu.
1
Highlight Audio Settings and press T.
2
3
Press b or B to highlight the item you want to adjust
(Bass, Treble, or Balance).
Audio Settings
Bass
Treble
Balance
StableSound
Reset
4
Press C or c to adjust the level.
• C makes the bass or treble weaker or increases the
balance in the left channel (depending on the item
selected).
• c makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).
To save the new settings, highlight Done and press T.
5
To reset the settings to the factory defaults, highlight
Reset and press T.
100
100
0
Off
Done
43