TheaterWide 3 picture size (for letter box programs
with subtitles)
The picture is stretched wider to fill the width of the screen,
•
but only slightly stretched taller.
The top and bottom edges are hidden. To view the hidden
•
areas (such as subtitles or captions), see "Scrolling the
®
TheaterWide
picture" at right.
A B C D E F G - - - - - - - - - - - - - - - -
Full picture size (for 16:9 [480i, 480p] source
programs only)
If receiving a squeezed 4:3 format program, the picture is
•
stretched wider to fill the width of the screen, but not
stretched taller.
None of the picture is hidden.
•
Native picture size (for 1080i signal programs)
If receiving a 1080i signal program, the Native mode
•
displays the entire picture without scaling.
Note: Native picture size is available for 1080i signals only. If
the signal being received is other than 1080i, "Native" will be
grayed out in the Picture Size screen.
36
Chapter 5: Using the TV's features
A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -
TheaterWide 3 picture size example
Full picture size example
Native picture size example
Scrolling the TheaterWide
(TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide 2 and
TheaterWide 3 modes for each input.
To set the scroll settings:
Press Y and open the Video menu.
1
Highlight Theater Settings and press T.
2
Video
Picture Settings
Advanced Picture Settings
Theater Settings
Navigate
ENTER
Select
3
In the Picture Size field, select either TheaterWide 2
or TheaterWide 3 (you cannot scroll in any other mode).
4
Press b to highlight the Picture Scroll field.
5
Press C or c to scroll the picture up and down as needed,
from –10 to +20.
Theater Settings
Picture Size
Picture Scroll
Cinema Mode
Auto Aspect Ratio
Reset
To save the new settings, highlight Done and press T.
6
To revert to the factory defaults, highlight Reset and
press T.
®
picture
CH RTN
Back
EXIT
Exit
TheaterWide 2
-5
Film
On
Done