Chapter 5: Using The Tv's Features; Selecting The Video Input Source To View; Labeling The Video Input Sources - Toshiba REGZA 42LX196 Operating Manual

Selecting the video input source
to view
To select the video input source to view:
Press + on the remote control or TV control panel.
1
2
Press 0–8 to select the input source you want to view:
a) You can select the video input, which will depend on
the input terminals you used to connect your devices
(see Installation Guide).
The current signal source displays in the top right corner
of the Input Selection screen.
Input Selection
0 ANT 1 ANT 1
1 Video 1
2 Video 2
ColorStream HD1
3
4 ColorStream HD2
5 HDMI 1
6 HDMI 2
7
PC
8
ANT 2
0 8
- /
b) Repeatedly press Bb on the remote control (or
CHANNEL Bb on the control panel) to change the
input; or
c) Repeatedly press + on the remote control or TV
control panel to change the input.
Note:
• You can label the video input sources according to the
specific devices you have connected to the TV
(- "Labeling the video input sources" at right).
• The source can be "hidden" (- "Labeling the video input
sources" at right).
30

Chapter 5: Using the TV's features

ANT 1
INPUT
to Select

Labeling the video input sources

You can label each video input source to describe the type of
device you connected to each source. You can choose from the
following preset list of labels:
"– –" (default label)
•
Cable
•
DTV
•
Satellite/DSS
•
VCR
•
Laser Disk
•
DVD
•
HD DVD
•
Audio Receiver
•
Compact Disc
•
Video Recorder
•
Game Console
•
Hide (to hide an unused input in the Input Selection
•
screen)
Note:
• If you select ANT 2 in the Input selection screen, you can
choose only "– –" or "Hide" as the label.
• If you select PC in the Input Selection screen, you can
choose only "– –," "Hide," or "Game Console" as the label.
To label the video input sources:
Press Y and open the Preferences menu.
1
Highlight Input Labeling and press T.
2
3
Press B or b to highlight the video source you want to
label.
Preferences
Closed Caption Mode
Closed Caption Advanced
Input Labeling
Menu Language English
Channel Browser Setup
Navigate ENTER Select
Input Labeling
Video 1
Video 2
ColorStream HD 1
ColorStream HD 2
HDMI 1
HDMI 2
PC
ANT 2
Reset
4
Press C or c to select the desired label for that input
source. If a particular input is not used, you can select
Hide as the label, which will cause that input to be
"grayed out" in the Input Selection screen and skipped
over when you press + on the remote control.
Off
CH RTN Back EXIT Exit
DVD
Cable
Video Recorder
Hide
DTV
Satellite/DSS
- -
- -
Done