Using The Pc Settings Feature; Setting The Pc Audio - Toshiba Regza 42RV535U Owner's Manual

52RV535U_EN.book Page 51 Tuesday, July 22, 2008 5:25 PM

Using the PC settings feature

You can view an image from a PC on the TV screen.
When a PC is connected to the TV's PC IN terminal, you
can use the PC Settings feature to make adjustments to
the image.
If the edges of the picture are cut off, readjust the
Horizontal Position and Vertical Position. If the
picture is affected by interference, readjust the Clock
Phase and Sampling Clock.
To adjust the PC settings:
1
Select PC input mode (- "Selecting the video input
source to view" page 36).
2
From the Setup menu, highlight PC Settings and
press T.
Note: If a PC is not connected or there is no PC input
signal, this feature will be grayed out in the Setup menu.
3
Press B or b to highlight the item you want to
adjust.
4
Press C or c to make the appropriate adjustments.
Note: The screen is disrupted momentarily when
adjusting the PC settings. This is not a sign of malfunction.
Mode Description
Moves the picture left/right.
Horizontal
The adjustment range is within ±10 from
Position
center.*
Moves the picture up/down.
Vertical
The adjustment range is within ±10 from
Position
center.*
Helps to reduce noise and sharpen the
picture.
Clock Phase
The adjustment range is within ±32 from
center.*
Helps to reduce noise and minimize
Sampling periodic vertical stripes on the screen.
Clock The adjustment range is within ±5 from
center.*
* The default settings and /or adjustment range vary depending on
the input signal format.
Chapter 6: Using the TV's features

Setting the PC Audio

This function allows you to output or mute the sound
from your PC when connecting using the PC IN terminal
and an analog RGB cable.
To set the PC Audio:
1
From the Audio menu, highlight Audio Setup and
press T.
2
Press B or b to select PC Audio and then press C or
c to select No or Yes.
Yes: When viewing the PC input, the audio from
the PC Audio input can be heard.
No: When viewing the PC input, there will be no
audio.
Note: Because the PC and HDMI 1 inputs share the same
set of analog audio inputs, the PC Audio menu setting
influences the HDMI 1 Audio menu setting. If PC Audio is
set to "No," the HDMI 1 Audio setting changes to "Auto."
If PC Audio is set to "Yes," the HDMI 1 Audio setting is
set to "Digital" and is grayed out in the menu. (Also see
item 4 on page 11 and "Setting the HDMI
on page 33.)
™ audio mode"
51
RV535U (E/F) Web 213:276