Jeep WRANGLER 2020 Owner's Manual page 84

82 GETTING TO KNOW YOUR VEHICLE
2. Undo the hook-and-loop fastener located at
the upper front corner of each quarter
window.
Hook-And-Loop Fastener Location
3. Starting at the rear of the vehicle, remove
plastic retainer from along the bottom of the
window moving toward the front of the
vehicle.
Step Three
4. Remove plastic retainer from bottom to top
of the window.
Step Four
5. While keeping the window level, slide
rearward until it is completely separate from
its retainer. Do not pull downward while
removing the window. Damage to the
retainer could result.
Step Five
6. Store in soft window bag (if equipped) or a
safe location.
NOTE:
Refer to "Soft Top Window Storage Bag — If
Equipped" in this section for information on the
use of the storage bag.