Fold And Tumble Rear Seat - Two Door Models - Jeep WRANGLER 2020 Owner's Manual

To Fold Down The Rear Seat
There are two release levers located on each
upper outboard side of the rear seat. The larger
of the two release levers folds down the seat
and the head restraint simultaneously. The
smaller lever folds down the head restraint
independently for improved visibility.
To fold the seat, lift upward on the large release
lever and slowly fold down the seatback. The
head restraint will fold automatically with the
seat when this lever is pulled.
Seatback Release Lever
NOTE:
You may experience deformation in the seat
cushion from the seat belt buckles if the seats
are left folded for an extended period of time.
This is normal. By simply opening the seats to
the open position, the seat cushion will return to
its normal shape over time.
To Raise The Rear Seat
Raise the seatback and lock it into place. Then,
raise the head restraint until it locks into place.
If interference from the cargo area prevents the
seatback from fully locking, you will have
difficulty returning the seat to its proper position.
WARNING!
Be certain that the seatback is securely
locked into position. If the seatback is not
securely locked into position the seat will not
provide the proper stability for child seats
and/or passengers. An improperly latched
seat could cause serious injury.
GETTING TO KNOW YOUR VEHICLE
Fold And Tumble Rear Seat — Two Door
Models
NOTE:
Prior to folding the rear seat, it may be neces-

sary to reposition the front seats.
Be sure that the front seats are fully upright

and positioned forward. This will allow the
rear seat to fold down easily.
Folding The Rear Seat
1. Lift the seatback release lever and fold the
seatback forward.
Rear Seatback Release Lever
2. Slowly flip the entire seat forward.
35
2