Jeep WRANGLER 2020 Owner's Manual page 133

Vehicle Info
Push and release the up or down arrow button
until the Vehicle Info menu icon is displayed
in the instrument cluster display. Push and
release the left or right arrow button to scroll
through the information submenus and push
and release the OK button to select or reset the
resettable submenus.
Tire Pressure Coolant Tempera-
 
ture
Transmission Oil Pressure
 
Temperature —
Automatic Trans-
mission Only
Oil Temperature Oil Life
 
Battery Voltage

Off Road
Push and release the up or down arrow button
until the Off Road menu icon is displayed in the
instrument cluster display. Push and release
the left or rightarrow button to scroll through the
information submenus.
Drivetrain

Front Wheel Angle: displays the graphical

and numerical value of calculated
average front wheel angle from the
steering wheel orientation.
Transfer Case Lock Status: displays

"Lock" graphic only during 4WD High,
4WD High Part Time, 4WD Low status.
Axle Lock And Sway Bar Status (If Equipped):

displays front and rear or rear only axle
locker graphic, and sway bar connection
graphic with text message (connected or
disconnected).
Pitch And Roll

Displays the pitch and roll of the vehicle

in the graphic with the angle number on
the screen.
NOTE:
When vehicle speed becomes too high to
display the pitch and roll, "- -" will display in
place of the numbers, and the graphic will be
greyed out. A message indicating the necessary
speed for the feature to become available will
also display.
GETTING TO KNOW YOUR INSTRUMENT PANEL
Driver Assist — If Equipped
The Driver Assist menu displays the status of
the ACC systems.
Push and release the up or down arrow button
until the Driver Assist menu is displayed in the
instrument cluster display.
Adaptive Cruise Control (ACC) Feature — If
Equipped
The instrument cluster display displays the
current Adaptive Cruise Control (ACC) system
settings. The information displayed depends on
ACC system status.
Push the Adaptive Cruise Control (ACC) ON/OFF
button (located on the steering wheel) until one
of the following displays in the instrument
cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read
"Adaptive Cruise Control Off."
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed
setting has not been selected, the display will
read "Adaptive Cruise Control Ready."
Push the SET + or the SET - button (located on
the steering wheel), and the following will
display in the instrument cluster display.
131
3