Jeep WRANGLER 2020 Owner's Manual page 183

Occupant Classification Module (OCM) And
Sensor
The Occupant Classification Module (OCM) is
located underneath the front passenger seat.
The Sensor is located beneath the passenger
seat cushion foam. Any weight on the seat will be
sensed by the Sensor. The OCM uses input from
the Sensor to determine the front passenger's
most probable classification. The OCM
communicates this information to the ORC.
The ORC uses the classification to determine
whether it should activate or deactivate the
Passenger Advanced Front Air Bag. In order for
the OCS to operate as designed, it is important
for the front passenger to be seated properly and
properly wearing the seat belt. Properly seated
passengers are:
Sitting upright

Facing forward

Sitting in the center of the seat with their feet

comfortably on or near the floor
Sitting with their back against the seat back

and the seat back in an upright position
Seated Properly
The OCS may deactivate the deployment of the
Passenger Advanced Front Air Bag if the OCS
estimates that:
The front passenger seat is unoccupied or

has very light objects in it.
The front passenger seat is occupied by a

rear-facing child restraint.
The front passenger seat is occupied by a child,

including a child seated in a forward-facing child
restraint or booster seat.
The front passenger seat is occupied by a

small passenger, including a child or small
adult.
The front passenger is not properly seated or

his or her weight is taken off of the seat for a
period of time.
SAFETY 181
4