Menu Options - Datavideo SE-700 Quick Start Manual

Menu Options

This section covers the Menu options in the order that they appear on the screen. These settings are explained in
detail in the sub-sections. Options may vary depending on the firmware version in use.
Main Menu will appear on the screen after the MENU button is pressed. Use UP/DOWN/LEFT/RIGHT arrows to
browse through the Menu and make your selection by pressing the ENTER button.
Please note that long pressing the up/down arrow buttons will allow the user to increment and decrement the
parameter value at a fast speed.
Main Options Sub-Options
Transition
Wipe
Start
Border
Position
Matte
Keyer
Keyer Ctrl
Keyer
Key Source
Fill Source
M/E Mix Effect
DSK Downstream Key Effect
FTB Fade-to-Black Effect
Wipe Wipe Effect Presets
Soft Border Softness
Width Border Width
Luma Luma of Border Color
Sat Border Color Saturation
Hue Border Color Hue
X Horizontal Position
Y Vertical Position
Luma Matta Luma
Sat Matte Saturation
Hue Matte Hue
Linear
Luma Type of Keyer
Chroma
Select if only one source is enabled for the keyer (Key
Self
source)
Select if two sources are enabled for the keyer (Fill and Key
Split
sources)
Lift Parameter for dark/black areas of the key image
Gain Parameter for light/white areas of the key image
Opac Parameter for transparency of the overall foreground key
image
Bars
Matte
Freeze
Still
Input4 Key Source Selections
Input3
Input2
Input1
Black
Bars
Matte
Freeze
Still Fill Source Selections
Input4
Input3
Input2
Parameters