P-In-P; P-In-P Source; Position; Border - Datavideo SE-700 Quick Start Manual

P-In-P

Picture-In-Picture (P-In-P) places an image on the PGM or PVW screens.
Start P-in-P Src
Keyer

Position

P-In-P

Border

DSK Border
Still

Crop

User Crop
Inputs
Setup

P-In-P Source

This sub-option allows the user to assign the P-In-P source; various options are listed below:
Bars Matte
Position
The user is allowed to adjust the position of the PIP screen by adjusting values of X, Y and SIZE, where X is the
horizontal position, Y is the vertical position and Size is the PIP screen size.
X
Positive value: position the PIP
image to the right
Negative value: position the PIP
image to the left
Zero value: Position the PIP
image at the center
Border
PIP border color can be adjusted by adjusting the Luma, Saturation and Hue values. Width of the border can also
be modified as well.
Crop
The PIP image crop can be adjusted by modifying the following parameters:

Left – Adjusts the position of the left border of the PIP image

Right – Adjusts the position of the right border of the PIP image

Size – Adjusts the PIP image crop size

Top – Adjusts the position of the top border of the PIP image

Bot – Adjusts the position of the bottom border of the PIP image
X
Luma
Width
Left
Top
Freeze Still
Y
Positive value: move the PIP
image up
Negative value: move the PIP
image down
Zero value: Position the PIP
image at the center
Black
20% Y
0 Sat
0
0 Right
0 Bot
Input 4 Input 3
Size
Ranges from 0 to 100 with 0 being the
smallest and 100 being the largest
10% Size 50%
0 Hue 0.0
0 Size
0
Input 2 Input 1
0
Black