Ftp By Motion Detection - Toshiba IK-WR01A Operation Manual

Recording Images on FTP Server (Cont.)
IFTP by Motion Detection
You can control the settings to record images for FTP by Motion Detection.
To configure the motion detection, select "Enable" in or "Motion Detect" in the alarm
G
settings (➝ page. 64)
To run the recording, select "Motion Detection" in "Connection to FTP Enable"
G
(➝ page. 43).
1) Configure the numbers of frames you want to record for
Pre-Recording
Possible numbers of frames are as follows:
G
Enter a number in the range of 0 through 30.
2) Configure the numbers of frames you want to record for
Post-Recording
Enter the number between 0 and 1000.
G
NOTE
• Numbers of recorded image frame may decrease depending on networking
conditions and recording cycle
3) Configure Interval(s)
Records 1 image per configured recording cycle (second).
G
Setting ranges are 1 through 10.
NOTE
• Cycle may change depending on Resolution (image size) and networking
conditions.
48
.