About the POWER SELECT Switch
CAUTION : The IK-WR01A operates with one of the following power source: 12vDC,
24vAC or PoE. Set the power selection switch on the camera to the
correct power source before turning the camera on. DO NOT RE-SET
THE POWER SELECTION SWITCH WHEN THE UNIT IS ON.
When power is supplied from an AC24V or DC12V power source
When power is supplied from a PoE compatible hub, etc.
NOTE
Power will not be supplied if the power source type and POWER SELECT switch do not
match. Ensure that the POWER SELECT switch is properly set before inputting power.
POWER SELECT Switch
Adapter:
UL listed class 2 power supply
Switch the POWER SELECT switch
to AC24V/DC12V.
AC24V/
PoE
DC12V
LAN cable
Switch the POWER SELECT switch
to PoE.
AC24V/
PoE
DC12V
PoE (IEEE802.3af)
compatible hub, etc.
15