Troubleshooting - Toshiba PDR PDR-M70 Instruction Manual

Digital still camera
Hide thumbs Also See for PDR PDR-M70:
Table of Contents

Advertisement

Troubleshooting

First check the warning displayed on the LCD monitor (
120). Then check the following items.
Problem
No power supply
The camera turns OFF
during operation.
The battery runs out
quickly.
No photograph is taken
when the shutter button
is pressed.
Causes
The battery is exhausted.
The AC adapter plug has come
out of the power outlet.
The battery is exhausted.
You are using the camera in
extremely cold conditions.
The terminals are dirty.
The battery has reached its
effective life.
No SmartMedia™ is loaded.
The SmartMedia™ is loaded
incorrectly.
Not enough space on the
SmartMedia™
The SmartMedia™ is write-
protected.
The SmartMedia™ is not formatted.
The SmartMedia™ is damaged.
The Auto Power OFF function is
activated.
Page 132) and the color of the viewfinder LED (
Remedy
• Charge the battery.
• Load a fully charged battery.
Plug the adapter back in.
• Charge the battery
• Load a fully charged battery.
Put the battery in your pocket or another
warm place to heat it and then load it into
the camera just before you take a picture.
Wipe the battery terminals with a clean, dry
cloth.
Load a fully charged battery.
Load a SmartMedia™.
Load the SmartMedia™ correctly.
• Load a new SmartMedia™.
• Erase photographed images or change
the size and quality to increase space on
the SmartMedia™.
Remove the write-protection or replace with
a new SmartMedia™.
Format the SmartMedia™.
Load a new SmartMedia™.
Either press the shutter button half way
down for at least two seconds, or change
the mode dial setting.
- 134 -
Page
See Page
P.26
P.30
P.26
P.16
P.26
P.32
P.33
P.32
P.95
P.97
P.35
P.94
P.32
P.114

Advertisement

Table of Contents
loading

Table of Contents