Table of Contents
Advertisement
Basic Photographic Settings (SET-UP mode) (continued)
Press
.
The tab menu is displayed.
How to set the time (
For details on how to reset the frame number (
Use
or
and press ENTER.
To cancel changing of settings, press
To quit the SETUP MENU, change the mode dial setting.
AUTO POWER OFF
If no operation is carried out for a fixed amount of time (default: about one minute), power consumption
is set to its minimum state (power almost turned OFF) to prevent battery wear. This is called the Auto
Power OFF. This setting allows you to set the time when the camera turns off automatically. This function
is not activated during automatic playback (
[
] voice record mode (recording/playing back). To return to the normal state after the Auto Power OFF
was executed, either change the mode dial or press the shutter down half way for at least two seconds
(
Page 41).
[1 MINUTE] (default)
[2 MINUTES]
[3 MINUTES]
Page 115)
to change the setting in the tab menu,
.
Page 116)
Page 86) or in the [
- 114 -
] PC mode or
Advertisement
Table of Contents
