Table of Contents
Advertisement
Taking Photographs Continuously (continued)
Press
or
You will be allowed to choose which image to save before it is
recorded to the SmartMedia™.
The number of photographs stored in the memory is displayed at the
bottom right of the screen, and the number in green is the image
currently displayed.
The green indication also moves as you move the image to be
displayed.
Use
or
The camera is set to erase all images immediately after photography.
1 [
]
2 [
]
3 [
]
1 to 3 can be combined regardless of their order to set saving and erasing of images.
to verify the image.
to select the recording method.
: This setting is for saving and erasing the selected image.
Press
or
to select the image, and press ENTER.
The red
mark appears under the selected image. To cancel selection of the
image, press ENTER again.
: This setting is for saving all images.
Press ENTER.
All images are selected, and all images with
This item cannot be selected if there is not enough space on the
SmartMedia™.
: This setting is for erasing all images.
Press ENTER.
- 62 -
turns into a red
.
Advertisement
Table of Contents
