Basic Photographic Settings (SET-UP mode) (continued)
OSD LANGUAGE
Set the display language of menus displayed on the LCD monitor.
All descriptions in this Instruction Manual are for when the display language is set to [ENGLISH].
VIDEO OUT
Sets the video output system according to the country in which your camera is used.
[NTSC]:
[PAL]:
FRAME NUMBER
Sets whether or not to reset the image number when you take photographs.
When the frame No. is selected, the message "RESET FRAME NUMBER" is displayed.
Press
or
Resetting of image numbers is supported only for the still image mode.
To reset movie image numbers, you must delete the entire folder (
[CANCEL]: Does not reset the image number.
[RESET]:
NTSC system (
Additional Information, Glossary)
PAL system (
Additional Information, Glossary)
to select [EXECUTE], and press ENTER.
Reset the image number.
- 116 -
Page 92).