Protecting Images (continued)
Removing the Protection
Carry out steps 1 to 3 in "Protecting An Image".
Use
or
press ENTER.
This fixes the images whose protection is to be removed, and [
under the image changes to [
To unprotect an image, press ENTER again.
To remove the protection from two or more images, repeat this
procedure for the necessary number of images.
Carry out step 5 in "Protecting An Image".
Memo
• To write-protect another image, write-protection can be simultaneously carried out if set at step 2.
• [
] is displayed for images that are specified in the DPOF format, and write-protection cannot be
removed. To remove write-protection, cancel the DPOF format setting.
to select the image to unprotect, and
].
- 109 -
]