Table of Contents
Advertisement
Photography (Auto Photography) (continued)
Set the mode dial to [
Look at the image on the LCD monitor to compose the
picture.
To adjust the brightness of the LCD monitor
Press the shutter button down half way 1 , and press
it down fully 2 .
• Pressing the shutter button down half way adjusts the exposure,
and pressing the shutter button down fully takes the shot.
• When the focus and exposure are correctly adjusted, the
viewfinder lamp lights (green), and the AF icon turns green.
• If you shoot a still picture, when preview is set to ON (
a preview image is displayed on screen for about two seconds.
• The viewfinder LED turns red while image data is being recorded
onto the SmartMedia™.
Memo
• The LCD monitor sometimes displays bright, dark or colored spots at all times. This is not a malfunction.
These spots do not appear in the photographed image.
• The image is not displayed on the LCD monitor while the shutter button is pressed down fully.
].
Page 119
- 45 -
Press down
half way.
Press down
fully.
Page 77),
Advertisement
Table of Contents
