Table of Contents
Advertisement
Copying Images (continued)
Use
or
ENTER.
This fixes the image to be copied, and [
image.
To cancel a selection, press ENTER again.
If you want to copy two or more images, repeat the procedure for the
necessary number of images.
The bar at the bottom of the screen indicates the amount of buffer
memory used to store the date of the images which have been
selected, and the remaining memory space. The amount of memory
space consumed is indicated in green.
When the Zoom switch is pressed toward "T" during image selection,
the image is displayed to fit the entire screen. To redisplay the
original image, move the Zoom switch towards the "W".
Use
or
The screen indicating that the image is being read appears.
Load the SmartMedia™ for copying the image to.
The message [EXCHANGE CARD] is displayed.
1 Remove the SmartMedia™.
2 Replace it with another SmartMedia™.
to select the desired image, and press
to select [EXECUTE], and press ENTER.
] is displayed under the
- 100 -
Advertisement
Table of Contents
