Table of Contents
Advertisement
Protecting Images (continued)
Use
or
The PROTECT menu is displayed.
Use
or
and press ENTER.
This fixes the image to be protected, and [
the image.
To cancel the selection, press ENTER again.
To write-protect two or more images, repeat this procedure for the
necessary number of images.
When the Zoom switch is pressed toward "T" during image selection,
the image is displayed to fit the entire screen. To redisplay the
original image, move the Zoom switch towards the "W".
Use
or
To quit write-protection, select [CANCEL].
When write-protection ends, the screen returns to the PLAYBACK MENU.
To quit the PLAYBACK MENU, press the MENU button.
Memo
• When the PROTECT setup screen is displayed again, [
• To cancel write-protection for an image, write-protection is simultaneously canceled if set at step 4.
to select [PROTECT] and press
to select the desired image to protect,
to select [EXECUTE], and press ENTER.
.
] is displayed under
] is displayed under protected images.
- 108 -
Advertisement
Table of Contents
