Table of Contents
Advertisement
Basic Settings (
Press
The tab menu is displayed.
Use
and press ENTER.
To cancel changing of settings, press
To quit the SETUP MENU, change the mode dial setting.
AUTO POWER OFF
If no operation is carried out for a fixed amount of time (default: about one minute), power
consumption is set to its minimum state (power almost turned off) to prevent battery wear. This is
called the Auto Power OFF. This setting allows you to set the time when the camera turns off
automatically. This function is not activated during automatic playback or in the [
To return to the normal state after the Auto Power OFF has been executed, press the POWER
button to turn the power on again.
[1 MINUTE]
[2 MINUTES]
[3 MINUTES]
SOUND
Sets whether or not to sound the beep tone.
[ON]
[OFF]
112
mode) (continued)
.
or
to change the setting in the tab menu,
:If no operation is carried out for 1 minute, Auto power off is activated. (Default)
:If no operation is carried out for 2 minutes, Auto power off is activated.
:If no operation is carried out for 3 minutes, Auto power off is activated.
:Sounds the beep tone according to the operating state or operation. (default)
:Does not sound the beep tone in any state.
.
] PC mode.
Hide quick links:
Advertisement
Table of Contents
