How To View 'Diagnostics' Data; How To View 'Site Data' Version - Honeywell GENT Nano panel-based Commissioning Instructions

How to view 'Diagnostics' data

The diagnostic data of mains, battery, loop, 24V supply, master alarm circuits, class change, external evacuate, earth and repeat indicator can be displayed for engineering use. This information is for
engineering use only and the illustration below show typical values. You will need to be at Access level 4 to view diagnostics data.
Menu
Select
Engineering

How to view 'Site data' version

The Site Data version number is a count of each upload of the configuration made from the Nano commissioning tool. You will need to be at access level 2 or above to view site data version.
Menu
Select
Engineering
4188-949 issue 3_05/10_Nano Comms inst.
Select
System > Diagnostics
System > Select Versions
Battery supply
Battery load test
Mains supply
PSU Voltages
Mns BtN BtL
207 207 206
MCB Voltages
Select MA1 MA2 Cls
086 084 127
Update
Master alarm circuit 1
Master alarm circuit 2
Class Change
External Evacuate
Select 'Update' to refresh the voltage values.
Select Site Data Select
Nano panel based system
Charger Nominal
Charger Recharge
Loop voltage
16:15 Fri 26/04/08
24V supply
ChN ChR LpV 24V
255 031 196 047
Update
Evc Ear 24V Rpt
128 090 205 209
Back
Repeat indicator
24V supply
Earth
10:15 Tue 16/02/10
Site Data Version Details
Version Number: 001
Last Updated: 16-02-2010
Back
Back
29