Table of Contents
Advertisement
Appendix B - Obtain network, device, and network variable information
Appendix B - Obtain network, device, and network variable information
Use one of the following devices to temporarily connect a LAPTOP to the LonWorks network.
•
Option 1: Using an Echelon U10/U20 Network Interface (page 20)
•
Option 2: Using an SLTA-10 Network Adapter (page 22)
•
Option 3: Using an iLon
PREREQUISITES
•
One of the above Echelon devices
•
The location of each LonWorks device's service pin from the third-party representative.
TIP For some VAV devices, the connected sensor's override button may also function as a service pin.
Option 1: Using an Echelon® U10/U20 USB Network Interface
To obtain and install Echelon software:
1.
Go to www.echelon.com/downloads.
2.
Log in or create a new login account.
3.
In Search for software in, select Recommended Downloads, click Find, then download Open LDV (latest
version) Network Drivers for Windows 2000/XP/2003.
4.
In Search for software in, select Development Tools, click Find, then download NodeUtil Node Utility
(latest version).
5.
Run the Open LDV .exe file to install the software.
6.
Unzip the file that you downloaded for the NodeUtil Node Utility. Make note of this .exe file's location.
EXAMPLE:
To connect your computer to the LonWorks network:
7.
Connect the Echelon U10/U20 USB Network Interface to your computer's USB port and to the LonWorks
network.
8.
On the computer, select Start > Control Panel.
9.
Double-click LonWorks Interfaces.
10.
Select the item in the left column.
EXAMPLE: LON2
LonWorks Integration Guide
i-Vu® Link and Open Link
TM
10 Ethernet Adapter (page 24)
c:\Lonstuff
20
CARRIER CORPORATION ©2018
All rights reserved
Advertisement
Table of Contents
