Option 3: Using An Ilon10 Ethernet Adapter - Carrier LonWorks i-Vu Link Integration Manual

Table of Contents

Advertisement

Appendix B - Obtain network, device, and network variable information

Option 3: Using an iLon10 Ethernet Adapter

To obtain and install Echelon software:
1.
Go to www.echelon.com/downloads.
2.
Log in or create a new login account.
3.
In Search for software in, select Recommended Downloads, click Find, then download Open LDV (latest
version) Network Drivers for Windows 2000/XP/2003.
4.
In Search for software in, select Development Tools, click Find, then download NodeUtil Node Utility
(latest version).
5.
Run the Open LDV .exe file to install the software.
6.
Unzip the file that you downloaded for the NodeUtil Node Utility. Make note of this .exe file's location.
EXAMPLE:
To connect your computer to the LonWorks network:
7.
Connect your computer to the iLon10 using a crossover cable alone or a straight-through cable with a hub.
The iLon10 must also be connected to the LonWorks network segment.
8.
On the computer, select Start > Control Panel.
9.
Double-click LonWorks Interfaces.
10.
Click Add.
11.
Type a name such as iLon10 and write down the name. You will use it later.
12.
Click Next twice.
13.
Type 1628 for the IP Port address of the iLon10.
NOTE 1628 is the default port and is used for most installations. If your computer does not connect to the
LonWorks network, ask the third-party representative if a different port was used.
14.
Click Finish, then click Close.
To obtain the LonWorks device's .log file and .xif file:
15.
Select Start > All Programs > Accessories > Command Prompt.
16.
Type cd "<path>", replacing <path> with the path where you unzipped NodeUtil (step 6 above),
then press Enter.
EXAMPLE:
17.
Type nodeutil -dx.default.<name>, replacing <name> with the name you typed in step 11
above, then press Enter.
EXAMPLE:
18.
Type >.
19.
Type a name for the file that NodeUtil will create with the LonWorks device's network variable information.
EXAMPLE:
20.
Press Enter to create the file.
LonWorks Integration Guide
i-Vu® Link and Open Link
c:\Lonstuff
cd "c:\Lon stuff"
nodeutil -dx.default.iLon10
vav_controller.log
24
CARRIER CORPORATION ©2018
All rights reserved

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lonworks i-vu open link

Table of Contents