Table of Contents
Advertisement
2 Assign and download custom control programs and views to the i-Vu®
Link/Open Link
1
If using the i-Vu® or Field Assistant application, go to Devices page > Manage tab and select the i-Vu®
Link/Open Link in the navigation tree.
2
Click the Add Control Program button on the right. A dialog window appears.
3
Enter a Display Name. Select the i-Vu® Link/Open Link from drop-down list under Programmable Controller.
4
Click Add New under Control Programs. A second dialog window will appear.
5
Browse to the .equipment file that you created in Snap and click Continue.
6
When message appears File added successfully, click Close.
7
To upload a graphic, click Add New under Views and browse to your .view file. A second dialog window
appears.
8
Browse to the .view file that you created in ViewBuilder and click Continue.
9
When message appears File added successfully, click Close.
10 Click OK.
11 Repeat steps 3 - 12 to add additional control programs and views.
12 In the navigation tree, select the i-Vu® Link/Open Link in the router list on the right and click Download All
Content.
NOTE This loads the control programs and graphics into the i-Vu® Link/Open Link.
To edit your control program in Snap
Follow these steps to edit an existing control program:
1
Log in to the i-Vu® or Field Assistant application.
2
Double-click the third party controller in the navigation tree. A dialog window appears.
3
Click Edit Existing under Control Programs. A new dialog window appears.
4
Save file to a location of your choice.
5
Click Close.
6
Start Snap.
7
Select File > Open and open the .equipment file that you saved.
8
Edit the control program and save to your computer.
9
Start the i-Vu® or Field Assistant application.
10 Double-click the third party controller in the navigation tree. A dialog window appears.
11 Click Add New button under Control Programs. A new dialog window appears.
12 Browse to your edited control program and click Continue. When message appears File added successfully,
click Close.
13 Click OK.
LonWorks Integration Guide
i-Vu® Link and Open Link
2 Assign and download custom control programs and views to the i-Vu® Link/Open Link
5
CARRIER CORPORATION ©2018
All rights reserved
Advertisement
Table of Contents
